Warmup 3iE Programmable Thermostat - Piano Black

3iE Programmable Thermostat from Warmup. An innovative touch screen thermostat with a full-colour screen. The first electric underfloor heating thermostat with Active Energy Management and an extremely easy-to-use user interface. 

Kit prices include VAT and Next Working Day Delivery if ordered before 3:00pm

£98.99

This item's in stock and ready to order!

If you want this item tomorrow, order within the next and we'll get it in the post straight away!

The cut off period for next day delivery has now expired, but don't worry if you order now we'll get your item in the post first thing in the morning.

Product Description

Warmup 3iE Programmable Thermostat - the 3iE Programmable Thermostat is an Innovative "first touch" thermostat with a full-colour screen. The first electric underfloor heating thermostat with Active Energy Management. Easy-to-use user interface - no instructions required.

Works with Warmup and Ambient underfloor heating systems.

Interactive graphical display of your program makes adjustment quick and easy, choose the display type that suits you best.

Wide choice of screen themes automatically adjust to changing conditions in your room, your home and even the seasons, to give optimal start-up times - no wasted energy.

Active Energy ManagementTM can save you up to 10% or more on your energy bill real-time graphical display shows you exactly how much energy you are using and when thermostat actively prompts you to choose the best and most efficient temperature for your room for maximum savings super-accurate floor temperature control reduces the costs associated with over and under-heating so less wasted energy.

Supplied with temperature probe - 16 amp rated (3600w max) - 3 Year Guarantee.

Our Price Includes VAT and UK Delivery.

Specification

Supply voltage220-240V, 50Hz
Load16A
Floor probe length3m
Sensorsfloor / air / external
Battery back up60 minutes
Dimensions (H/W/D)90 x 110 x 30 mm
Screen Dimensions35 x 50 mm
IP ratingIP20/IP32* (*with optional gasket)
ApprovalsASTA BEAB
Warranty3-Year,Extended Lifetime Warranty available

Installation

Separate the front housing of thermostat from wall module:

  • Unscrew both closing screws (bottom of stat) until they will not turn any further.
  • Release front housing by gripping lower half of outer frame and pulling outwards then upwards
  • Place front housing somewhere safe
  • Run all wires to the wall box. Check to ensure that you have included the following:
    • Power (Live and Neutral)
    • Heater (Live and Neutral)
    • Floor sensor
    • Fil pilote (if necessary)
    • External/ 2nd floor Sensor (if necessary)
  • Pull wires through wall box and complete terminal wiring.

IMPORTANT: Ensure that multi stranded wires are fully inserted into the terminals and secured tightly. Any loose strands should be trimmed as they could cause a short-circuit.