Skip to content
The Electric Underfloor Heating Specialists
Fast & Reliable Delivery
We'll Beat Any Price
Long-Lasting Warranty

Warmup Electric Underfloor Heating Mat Kit 150W

From
Was
£80.99
From £80.99
Now £80.99
In stock, ready to be shipped
PFM01
In stock, ready to be shipped
PFM1.5
In stock, ready to be shipped
PFM02
In stock, ready to be shipped
PFM2.5
In stock, ready to be shipped
PFM03
In stock, ready to be shipped
PFM3.5
In stock, ready to be shipped
PFM04
In stock, ready to be shipped
PFM4.5
In stock, ready to be shipped
PFM05
In stock, ready to be shipped
PFM06
In stock, ready to be shipped
PFM07
In stock, ready to be shipped
PFM08
In stock, ready to be shipped
PFM09
In stock, ready to be shipped
PFM10
In stock, ready to be shipped
PFM11
In stock, ready to be shipped
PFM12
In stock, ready to be shipped
PFM13
In stock, ready to be shipped
PFM14
In stock, ready to be shipped
PFM15
In stock, ready to be shipped
PFM16
In stock, ready to be shipped
PFM17
In stock, ready to be shipped
PFM18
In stock, ready to be shipped
PFM19
In stock, ready to be shipped
PFM20
In stock, ready to be shipped
PFM21
In stock, ready to be shipped
PFM22
In stock, ready to be shipped
PFM23
In stock, ready to be shipped
PFM24
Warmup Electric Underfloor Heating Mat Kit 150W
From
Was
£80.99
From £80.99
Now £80.99

Need expert advice?

Need help or product advice? Call 01799 524730

For delivery on Tuesday

Order within hours minutes seconds

PLEASE NOTE: For areas over 12m2, you will receive a combination 2 or more heating mats.

Introducing the Warmup Electric Underfloor Heating 150W Sticky Mat Kit

The Warmup Electric Underfloor Heating 150W Sticky Mat Kit is the ideal solution for installations within regularly shaped areas, where the 0.5m wide mats can be quickly rolled out across the floor in parallel runs. Whether you are planning to use vinyl, carpet, timber, tiles, or any other underfloor heating compatible floor finish, the StickyMat System provides exceptional performance and convenience.

If you require a flat and level floor surface to lay over, the StickyMat System can be embedded within a self-levelling compound. This ensures a seamless and even finish, especially when using carpet or other delicate floor coverings. Alternatively, the Foil Heater System offers a completely dry construction and eliminates the need for a leveling compound, unless it is to be used underneath a tiled floor finish. For irregularly shaped areas or spaces with multiple permanent fixtures, such as bathrooms, the Warmup Loose Wire System is the more suitable solution.

Compatible With All Floor Coverings

The StickyMat system is compatible with all types of floor coverings suitable for underfloor heating, including laminate flooring, vinyl, carpet, tiles, and more. Its versatility and the fact that it does not significantly raise the floor height make it an excellent choice for refurbishment projects. However, it is always important to double-check with your flooring supplier to ensure compatibility with the StickyMat System.

How does StickyMat work?

The 150W/m2 variant is ideal for use as a primary heat source in well-insulated areas, as the insulation boards retain heat in the room for longer and prevent downward heat loss. It can be installed on both timber and concrete subfloors.

The 200W/m2 variant is best suited for rooms or areas with high heat loss, such as conservatories. It is recommended to carry out a heat-loss calculation to assess the heating requirements of the room, especially if using the underfloor heating system as a primary heat source under tiles in a high heat-loss area.

Fast Installation

The StickyMat System consists of a thin 1.8mm wire evenly spaced and taped to a glass fibre mesh with a pressure sensitive adhesive. This adhesive securely binds the mats to the floor, keeping them flat and ensuring snag-free application of tile adhesive. The mats can be easily repositioned when necessary, providing flexibility during installation.

With the StickyMat System, installation time is reduced by 35% as the mats can be rolled out quickly across the floors. The ultra-thin heating cable is double insulated with an advanced fluoropolymer core, making it incredibly durable, tough, and easy to lay flooring over.

During the installation of the StickyMat System, flexible tile adhesive and self-leveling compound may be required. Instarmac UltraTile flexible tile adhesives and leveling compounds are highly recommended for their quality and performance. Rest assured, the StickyMat System is BEAB Approved and CE marked, meeting the highest safety standards for your peace of mind.

Features and benefits

  • Underfloor Heating Sticky Mat (Two individual mats if kit size over 12m2)
  • Thinnest wire you can buy: 2mm, multi-strand core, double-insulated using advanced fluoropolymers
  • StickyMat with pressure sensitive adhesive, for the fastest and most secure installation
  • Quick installation - Simply roll out the underfloor heating mat with pre-spaced wire
  • The pressure sensitive adhesive ensures that no wire or mesh is raised when tiling or covering with self-levelling compound
  • Can be repositioned easily without losing adhesion
  • Flexible - no customising is necessary
  • Approvals: ASTA BEAB, KEMA, GS, CERTIF, VDE and CE mark
  • Lifetime Warranty
  • Safety Net Installation Guarantee

Technical Specification

Heater construction Sticky fibreglass mesh with pre-spaced dual core earth screened cable
Operating voltage 220-240V; 50Hz
Mat width 500mm (0.5 metre)
Mat thickness 3mm
Inner insulation Advanced fluoropolymer (ETFE)
Outer insulation Advanced fluoropolymer (ETFE)
Output rating 150 W/m2
Cold tail length (connection lead) 3m
Heater maximum temperature 55°C/131°F
Approvals ASTA BEAB, KEMA and GS

Please Note: The following is intended as a guide only. Always refer to the full installation manual for instructions.

  • Divide the floor into a series of rectangles. From these measurements you can calculate how many mats you'll need and what sizes. Exclude permanent or static fixtures from your calculations.
  • If the floor is screed over concrete, it is advisable to lay insulation boards to minimise heat loss and ensure quicker warm up times.
  • Lay the first run. At the end of the run cut the mat leaving the cable intact, turn the mat through 90º or 180º and continue laying. When the area is covered, adjust the mat until the loops are equal distance apart. Now attach the mat to the subfloor using the special tape supplied.
  • You will need to install an RCD fused spur which powers the thermostatic controller/programmer and the matting system heating element network. Lay the temperature probe from the timer-thermostat onto the floor, equidistant between two of the cable loops, and attach it to the floor surface. Now take the unheated power supply cable from the end of the matting system, which should be positioned near the thermostat. Once all the connections have been made to the power supply, run the heater(s) to ensure they are heating up (no more than 10 minutes).
  • Either lay a thin, self-levelling screed over the mat and leave it to dry before laying tiles or trowel flexible tile adhesive directly over the mat and lay the floor tiles. Once the grouting is complete, let the tile adhesive cure before switching on the system.
Frequently bought with
  • £80.99
  • £14.99
    Total price
    £95.98

    We're here to help

    Our product experts are here to assist with any enquiry you might have.

    Our customer support is available Monday to Friday 7am-6pm.

    Call us on 01799 524730
    Email info@ambient-ufh.co.uk

    Reach out to our expert team
    Free delivery on all orders

    At Ambient Underfloor Heating, we strive to make every step of your order as easy and convenient as possible, from finding the right underfloor heating setup to best suit you to taking delivery of your system the very next day.

    We're proud to offer a range of delivery options to suit you, including free delivery on all orders over £19.99 or next working day delivery for a fixed price of £4.99.

    • 2-3 working days delivery, order over £19.99 - FREE (£4.99 if under £19.99)
    • Next working day - £4.99 (Order before 4pm Monday - Friday)
    • Next working day before 10.30am - £14.99 (Order before 4pm Monday - Friday)
    • Saturday delivery - £29.99 (Order before 4pm Friday)
    30 days returns policy

    At Ambient Underfloor Heating, our customers have 30 days to upgrade, replace or refund their orders.

    Returns

    At Ambient Underfloor Heating, we want to ensure you are happy with every purchase you make. If you have any issues with your chosen product, whether damaged, faulty or simply an unwanted item, you can simply return what you bought for a refund.

    Replacements

    We take great care in the delivery of all of our products, however, in the event of your delivery arriving damaged or if you notice a manufacturing fault of any kind within 48 hours of delivery, you're within your rights to a replacement.

    Upgrades

    Within 14 days of purchasing from us, you are eligible to upgrade if you deem you want something a little better. Simply send it back to us brand new and we'll happily assist you with an upgrade to your order.

    Lifetime warranty

    At Ambient Underfloor Heating, we are committed to providing our customers with high-quality products and outstanding customer service. That's why we offer a comprehensive warranty on all of our underfloor heating products, with a lifetime warranty for our signature kits.

    Our warranties are designed to give you peace of mind and ensure that your underfloor heating system operates reliably for years to come.

    Highly rated by our customers
    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare